X-Axis Drive Part; Motor - GRAPHTEC FCX2000 Service Manual

8 DISASSEMBLY AND ASSEMBLY
8.2

X-Axis Drive Part

8.2.1 X Motor
How to detach the X Motor
(1) Detach the left top cover (Refer to the section 8.1.6.).
(2) Disconnect the X motor cables from the main board (Connector 11 and J17).
J17: X motor power cable
J11: X motor encoder cable
(3) Remove the four M4L8 binding head screws holding the X motor, and then detach it.
X motor
M4L8 binding head screw
(4) Detach the core from the X motor encoder cable.
(5) Loosen the two M4L5 set screws holding the X motor pulley, and then detach it.
X motor
M4L5 set screw
Core
X motor pulley
FCX2000-UM-251-9370 8-14