Main Specifications - GRAPHTEC FC4500 User Manual

Chapter 7 SPECIFICATIONS
7.1 Main Specifications
Item
Configuration
Effective cutting area
Media hold-down method
Loadable media width
Maximum operating speed
Settable speeds
Cutting force
Minimum character size
Mechanical resolution
Programmable resolution
Distance accuracy* 2
Perpendicularity
Repeatability
Registration mark reading
accuracy* 3
Number of tools
Pen types
Cutting media
Interfaces
Buffer size
Command sets
LCD panel
Rated power supply
Operating environment
Guaranteed precision
operating environment
External dimensions (W x D x H) Approx. 857 x 780 x 200 mm
Weight
*1: HP-GL is a registered trademark of Hewlett-Packard Company in the US.
*2: When Graphtec-specified media and conditions are used.
*3: When the pen provided as a standard accessory is used with Graphtec-specified plotting paper;. the accuracy of reading the patterns
provided with these plotters
*4 When the CB15U or CB15U-K30 cutter blade is used
*5 When the CB15U-K30 cutter blade is used
*6 When the CB15UA cutter blade is used
7-2
FC4500-50
Flatbed
590 x 430 mm
Electrostatic adhesion
500 mm
75 cm/s
<FC4500>
Tool holder 1: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 cm/s
Tool holder 2: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 cm/s
<FC4510>
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 cm/s
Tool holder 1: 0.10 to 5.88 N (10 to 600 gf)
Tool holder 2: 0.10 to 2.94 N (10 to 300 gf)
Approximately 5 mm for alphanumeric characters (varies depending on the media and fonts used)
0.005 mm
GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ mode: 0.025 mm*
Within ±0.2% of the distance moved or ±0.1 mm, whichever is larger
Within 0.3/430 mm
Within 0.1 mm (excluding media expansion/contraction)
Within 0.3 mm
2
Water-based fiber-tip pen, Oil-based ballpoint pens
Marking film (vinyl, fluorescent, reflective)
Paper up to 0.5 mm thick (pattern paper, oilboard)*
Compressed foam sheets up to 0.8 mm thick *
Sandblast rubber sheets up to 1.0 mm thick *
F and G flute
Sheets for creating clear packages
High-intensity reflective film* 6
RS-232C, USB 2.0 (full speed)
2 MB
GP-GL, HP-GL™ emulation (menu-selectable)
20 characters x 2 lines
100 to 120 VAC/200 to 240 VAC, 50/60 Hz
10 to 35°C, 35 to 75% RH (non-condensing)
16 to 32°C, 35 to 70% RH (non-condensing)
Approx. 19 kg
FC4500-60
910 x 610 mm
Adhesive mat/Application sheet
666 mm
Within 0.4/610 mm
4
5
5
Approx. 1172 x 962 x 200 mm
Approx. 26 kg
FC4510-60
860 x 600 mm
0.10 to 5.88 N (10 to 600 gf)
1
Within 0.4/600 mm
Within 0.2 mm
Approx. 1172 x 962 x 200 mm
Approx. 27 kg