Table of Contents
Advertisement
Chapter 9 Using 5G DSS Signal Analyzer
Conducting Power vs Time measurements
Figure 142
Figure 142 5G DSS spurious emissions measurement
Conducting Power vs Time measurements
The following sections describe how to conduct Power vs Time measurements.
Power vs Time (Frame)
The Power vs. Time (Frame) measures the modulation envelope in the time domain,
showing the power of each time slot in a DSS signal.
Setting measure setup
After configuring the spectrum measurement in
on page
measurement settings can be saved and recalled as a file by selecting File Type as
Setup and load the file onto the instrument using the Save/Load icons on the side bar.
To set measure setup
1
Tap the Setup (
2
Tap Bandwidth from the following choices: 5 MHz, 10 MHz, 15 MHz, or 20 MHz.
Page 300
shows an example of spurious emissions measurement.
NOTE
You can only set the frequency range and attenuation by tapping the Configu-
ration icon. If you select the first icon next to the Range table above, it only
shows the selected range and if you select the second icon next to the Range
table, it keeps moving from the first selected range to the final selected range.
9, you can set the measure setup to continue your measurement. The
) icon in the side bar.
SPA06MA-O User's Guide
"Configuring spectrum measurements"
22145360, R005
April 2021
Advertisement
Table of Contents
