Spurious Emissions - Viavi SPA06MA-O R005 User Manual

Table 39 Setup per operating frequency
Operating
frequency
> 6 GHz
(FR2)
To set the limit
1 Tap Menu > Limit.
2 Tap to switch the Test Limits to On or Off to enable or disable Pass/Fail indica-
tion. The result table color for Pass is green, and the result table color for Fail is
red.
3 Optional. Tap the Save hot key on the side bar and select the save option form the
choices available for your measurement mode.
Figure 103
Figure 103 5G NR Multi-ACLR measurement

Spurious emissions

The Spurious Emissions measurement is to identify or determine the power level of in-
band or out-of-band spurious emissions within the necessary channel bandwidth and
modulated signal. The SPA06MA-O indicates either Pass or Fail based on the
specified limit of the signal.
April 2021
L
64
shows an example of 5G NR Multi-ACLR measurement.
NOTE
You can set the Lowest Ref. Frequency and Highest Ref. Frequency by
tapping the rectangle with value using the on-screen keyboard.
SPA06MA-O User's Guide
Case
E
{8,12,16,20,3
2,36,40,44}
+56*n
22145360, R005
Chapter 7 Using 5G NR Signal Analyzer
Conducting RF measurements
Slots in a
SCS
burst period
240 kHz
80 (62.5
ms
)
Page 209