Table of Contents
Advertisement
Chapter 11 Using EMF Analyzer
Conducting signal measurement
2
Tap to switch Sweep Speed to Fast or Normal.
a
b
3
Tap to switch Sweep mode to Continue or Single.
To save measurement file
You can save your current screen, result, and setup into the internal memory or your
external USB memory drive, USB A or USB B or SD card. To see the storage location,
tap the Folder (
and insert the SD card to MicroSD port to enable the option. When you are using the
Save feature, Hold is automatically enabled.
1
Tap the Save (
2
Tap the File Name input field.
3
Enter the file name you want using the on-screen keyboard.
4
To know and how to save, see the following options:
a
b
c
d
e
5
Optional. Tap to switch the Color Inversions to On to invert the image color (only
available to save as Screen or Report).
6
Optional. Tap Report Setup to create a report.
You can add image files and edit information such as Site Location, Site Informa-
tion, Test Purpose, and Test Result as needed.
To load measurement file
You can load your saved screen, result, and setup from the internal memory or your
external USB memory drive, USB A or USB B or SD card. To see the storage
location, tap the Folder (
A or B port and insert the SD card to MicroSD port to enable the option.
1
Tap the Load (
Page 390
If you set it to Normal, it displays the strongest PCI's beam with beam ID.
If you set it to Fast, it displays multi-PCI beam.
) icon. Make sure to insert a USB memory drive to USB A or B port
) icon on the side bar.
Select Screen to save the current screen with a fie type,.png.
Select Report to save the measurement result in a report format with
comments and captured screen images with a file type,.pdf.
Select Result as CSV to save the number of points displayed on the screen
with a file type,.csv.
Select Logging as CSV to save all measurement results with a file type,.csv.
Select Setup to save the setup and test configuration with a file type,.stav.
NOTE
Result as JSON is set to save as a default with other save types that you have
selected. It is to save CDM (Common Data Model) that contains setup and
result of the currently measured mode and enables you to format or design
files/data based on your need.
) icon on the side bar.
SPA06MA-O User's Guide
) icon. Make sure to insert a USB memory drive to USB
22145360, R005
April 2021
Advertisement
Table of Contents
