Viavi SPA06MA-O R005 User Manual page 403

Table of Contents

Advertisement

12 Tap Antenna & Cable Loss.
a
b
c
d
e
13 On the right panel of the screen, do the following steps:
a
b
c
d
e
April 2021
Optional. Tap to switch Antenna Gain to On or Off.
When the Antenna Gain is on, tap Antenna Gain Value and input the
required value using the on-screen keyboard.
Tap Antenna List EMF and select the required antenna from the pop-up
window. Based on the antenna list you selected, you need to check the Axis
mode and do the following:
-
When selecting Omni antenna (Isotropic E Field) and Axis to Auto, the
Current on the measurement screen indicates as x, y, or z automatically
and the Isotropic EMF Power is measured.
-
When selecting Yagi antenna (Log Periodic Broadband) and Axis to
Auto, the Current on the measurement screen indicates YAGI and the
EMF Power is measured.
-
When selecting Omni antenna (Isotropic E Field) and Axis to Manual, the
Current on the measurement screen indicates as your choice (x, y, or z)
and the EMF Power is measured.
Optional. Tap to Switch Cable Loss to On or Off.
When the Cable Loss is on, tap Cable Loss Value and input the required
value using the on-screen keyboard.
NOTE
When you need to use an antenna that is not listed in Antenna List EMF, con-
nect your antenna and then set the Antenna Gain and Cable Loss required for
your measurement.
Tap the Testing (
The instrument displays measurement results on the screen.
Tap the Hold icon on the side bar to hold the display.
Tap the Hold icon again to release the display.
Tap the Stop (
The alert message pops up to confirm whether you want to stop now or not.
Tap to switch to RSRP or Extrapolated.
The (Isotropic) EMF Power and Accumulated (Isotropic) EMF Power
(Average/Max/Min) values are displayed respectively for RSRP or Extrapo-
lated. The chart on the left panel displays based on the values displayed on
the right panel.
SPA06MA-O User's Guide
) button to start the measurement.
) button to stop the measurement.
22145360, R005
Chapter 11 Using EMF Analyzer
Conducting signal measurement
Page 387

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa06ma-oSpa06ma

Table of Contents