Table of Contents
Advertisement
Chapter 3 Using Interference Analyzer
Utility
5
Tap Channel Standard, select Technology and Band, and then the Apply
button.
6
Tap Channel Number and input a value using the on-screen keyboard.
7
Tap the Continue Step 2/4 button on the right edge to continue.
8
Set the parameters that appear in the table below the chart screen as needed.
9
Tap the Continue Step3/4 button on the right edge to continue.
10 Follow the instructions on the screen and tap the Continue Step4/4 button on the
right edge to continue.
11 Tap to enable Flatness.
Figure 29
Figure 29 PIM detection — multi carrier
Page 58
shows an example of a multi carrier PIM Detection measurement.
SPA06MA-O User's Guide
22145360, R005
April 2021
Advertisement
Table of Contents
