Table of Contents
Advertisement
Using icons
You can tap the Magnifier icon to check the frequency or time error. You can also
perform the following operation using the icons.
Icon
OTA ID Scanner
The LTE mobile receives signals from multiple base stations that all of these signals
share the same spectrum and are present at the same time. Each base station has
unique scrambling code assigned to the particular base station and it differentiates its
signal from other base stations in the area.
The ID Scanner shows key parameters such as RSRP (Reference Signal Received
Power) and RSRQ (Reference Signal Received Quality) that predict the downlink
coverage quickly. RSRPs from entire cells help to rank between the different cells as
input for handover and cell reselection decisions. RSRQ provides additional information
when RSRP is not sufficient to make a reliable handover or cell reselection decision.
Setting measure setup
After configuring the spectrum measurement in
on page
measurement settings can be saved and recalled as a file by selecting File Type as
Setup and load the file onto the instrument using the Save/Load icons on the side bar.
To set measure setup
1
Tap the Setup (
2
Tap Bandwidth and select the value from the following choices: 1.4 MHz, 3 MHz,
5 MHz, 10 MHz, 15 MHz or 20 MHz.
3
Tap the MIMO and select 2x2 or 4x4Hz to select the number of antenna ports.
April 2021
Description
Auto Scale: You can set the scale automatically.
Save as CSV: You can assign file name using the on-screen
keyboard and apply the changes. This will let you save your
measurement file internally.
Quick Save: You can save current measurement screen as
it is.
Close: You can close the screen you are seeing now.
9, you can set the measure setup to continue your measurement. The
) icon in the side bar.
SPA06MA-O User's Guide
"Configuring spectrum measurements"
22145360, R005
Chapter 5 Using LTE/LTE-A FDD Analyzer
Conducting OTA measurement
Page 117
Advertisement
Table of Contents
