Table of Contents
Advertisement
To set the limit for
S-SS Power
PBCH Power
Subframe Power
OFDM Symbol
Power
Time Error
4
Optional. Tap the Save icon on the side bar and select the save option form the
choices available for your measurement mode.
To set maker
If you tap the Chart to On under Display Menu, you can use Marker to place a marker
at a specific symbol.
1
Tap Menu > Marker.
2
Tap Marker View between On and Off to display or dismiss the marker on the
chart.
3
Tap Symbol to select the symbol number to which the marker is placed.
4
Enter the value using the on-screen keyboard and tap the Apply button.
Figure 148
April 2021
Set
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Test limits On/Off, High/Low Limit
Test limits On/Off, High/Low Limit
shows an example of DSS subframe measurement.
SPA06MA-O User's Guide
22145360, R005
Chapter 9 Using 5G DSS Signal Analyzer
Conducting modulation measurements
Page 319
Advertisement
Table of Contents
