Table of Contents
Advertisement
Viewing the logging data
To view the logging data
1
Load the saved logging file using the Load (
the file extension is.gomv.
2
Tap to switch Plot Item to RSRP, RSRQ, S-SS-SINR, S-SS RSSI, P-SS RSRP, S-
SS RSRP, S-SS Ec/Io or P-SS SNR.
3
Tap the Apply button.
The point color of the map changes to the corresponding value, and if there is no
detected LTE signal, the point will become gray color.
Importing cellsite DB
You can import the site DB by creating the 5G site information form.
To import cellsite DB
1
Create the 5G site information with an excel file as below.
2
Input the two mandatory fields: Lat (DecDeg) and Long (DecDeg).
3
Input the Azimuth field if you want to check the direction of antenna.
4
Make sure to save the file as (Comma delimited) (*.csv).
5
Copy the file to the USB memory stick and insert it to the USB A or USB B port of
the instrument.
6
Tap the Load (
7
Import the saved file.
Once the file is loaded, the following cellsite information appears with an icon.
Figure 93
April 2021
NOTE
When you load the result file, a pop-up message asking whether you want to
load data only or data with map appears. If the current screen does not display
all the loaded data, the screen mode will be automatically changed to Full.
) icon on the side bar.
shows an example of an importing cellsite DB.
SPA06MA-O User's Guide
22145360, R005
Chapter 6 Using LTE/LTE-A TDD Analyzer
Conducting OTA measurement
) icon on the side bar. Make sure
Page 181
Advertisement
Table of Contents
