Viavi SPA06MA-O R005 User Manual page 329

To set the limit
1 Tap Menu > Limit.
2 Tap NR Limit and set the limits depending on your selected measurement mode:
To set the limit for
Frequency error
EVMPSS
EVM SSS
Power PSS
Power SSS
Power PBCH
Time Error
3 LTE Limit and set the limits depending on your selected measurement mode:
To set the limit for
Frequency error
RS EVM
P-SS EVM
S-SS EVM
DL RS power
April 2021
Set
Test limits On/Off, High/Low Limit
Test limits On/Off, High Limit
Test limits On/Off, High Limit
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Set
Test limits On/Off, High/Low Limit
Test limits On/Off, High Limit
Test limits On/Off, High Limit
Test limits On/Off, High Limit
Test limits On/Off, High/Low Limit
SPA06MA-O User's Guide
22145360, R005
Chapter 9 Using 5G DSS Signal Analyzer
Conducting modulation measurements
Page 313