Table of Contents
Advertisement
Chapter 1 Overview
Module installation
Figure 2
b
4
Set the module onto the screen, ensuring the mating connectors between the two
pieces are aligned, as shown in
Figure 3
5
Insert the hex key in the brass fittings on the rear of the module and tighten the
internal captive fasteners to secure the module to the display.
6
Set the ONA-800 base to the module, ensuring the mating connectors are
aligned, as shown in
Page 4
Fastener locations
Lift the ONA-800 base off of the screen.
Module to screen alignment
Figure
SPA06MA-O User's Guide
Figure
3.
4.
22145360, R005
April 2021
Advertisement
Table of Contents
