Table of Contents
Advertisement
c
d
e
f
g
h
i
j
4
If you set up 1 or 2 carriers, the graph chart appears based on the setting.
a
b
5
If you set up 3 or more carriers, the carrier information table appears based on the
setting.
a
b
c
Figure 127
April 2021
If the MIMO is set to 2x2, the antenna ports 2 and 3 are disabled.
Select Channel Number to set the channel number for the selected index
using the on-screen keyboard.
Tap External Offset and input the value using the on-screen keyboard and
tap to switch the external offset to On (green) or Off (gray) as desired.
Tap Attenuation and input the value using the on-screen keyboard if you
want to set it manually (Manual). Or tap it to set Auto.
Tap to switch Preamp 1, 2, and Auto to On (green) or Off (gray).
Tap to switch PCI (Physical Cell ID) to Manual (number) or Auto and input a
value in the number box from 0 to 1007 using the on-screen keyboard.
Tap to switch LTE Mode to TDD or FDD.
Tap Bandwidth and input the value using the on-screen keyboard.
Tap to switch Cyclic Prefix to Extended or Normal.
Tap the Magnifier (
check the beam information without changing the measurement mode to
Beam Analyzer.
The beam information pops up for the selected carrier.
-
Select the Auto Scale (
attenuation level.
-
Select the Quick Save (
-
Select the Close (
Tap the Information (
mation.
Refer to a to b in step 4 above.
-
Select the Auto Scale (
attenuation level.
-
Select the Quick Save (
-
Select the Close (
Tap the Carrier Information Table (
list.
Tap the Chart (
) icon to see the carrier information graph.
displays a NSA Analyzer with sweep normal measurement.
SPA06MA-O User's Guide
)icon of the selected carrier. This enables you to
) to automatically set the reference and
) icon to capture the current screen.
)icon to close the Beam Information window.
)icon of the selected carrier to see the setup infor-
) to automatically set the reference and
) icon to capture the current screen.
)icon to close the Beam Information window.
) icon to see the carrier information
22145360, R005
Chapter 8 Using NSA Signal Analyzer
Conducting OTA measurements
Page 273
Advertisement
Table of Contents
