Table of Contents
Advertisement
Chapter 8 Using NSA Signal Analyzer
Conducting OTA measurements
Loading a map
To use any features related to maps, you need to download and install the maps on the
instrument. The VIAVI JDMapCreator will help you download maps. Make sure the
JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the Send
to EQP menu in JDMapCreator. For more information on how to use the JDMapCreator,
see the JDMapCreator 2.0 User Guide.
To load a map
1
Plug in your USB flash drive that has a map with a file type of .mcf created in
JDMapCreator.
2
Tap the Load (
3
Navigate to the map file that you want to open.
The File Information pane displays the file properties, including its name, size,
type, and date modified.
4
Tap the Load button on the screen.
5
Once you have loaded the map, you can also control the map using the following
icons on the map.
Table 76 Map icons
Icon
The left-most cell-site icon is activated when you import the cell-site information file.
To set measurement setup
Before starting the Route Map measurement, you need to set Spectrum
Page 280
) icon on the side bar.
Description
Tap to go to your current location on the map. Once tapped,
a purple icon appears on the map, indicating your current
location.
Tap to switch to the full screen map view.
Tap to zoom in on the map.
Tap to zoom out on the map.
Tap and select the area that you want to expand.
SPA06MA-O User's Guide
22145360, R005
April 2021
Advertisement
Table of Contents
