Viavi SPA06MA-O R005 User Manual page 248

Table of Contents

Advertisement

Chapter 7 Using 5G NR Signal Analyzer
Conducting OTA measurement
4
Tap Sync SCS Offset to fine-tune the offset using the SCS. See
for the sync raster offset range per SSB SCS and sync raster resolution.
5
Tap SSB Center Frequency and input the value using the on-screen keyboard.
6
Tap GSCN and input the value using the on-screen keyboard.
7
Tap L to set the maximum number of SS-PBCH blocks within a single SS burst
set (A set of SS being transmitted in 5 ms window of SS transmission) among 4, 8
and 64. Refer to the selection criteria based on the table in Step 2.
8
Tap SSB Auto Search Mode and do the following steps:
a
b
9
Tap SSB Auto Search between Start and Stop.
a
b
10 Tap SSB Periodicity and select the options from 5 ms, 10 ms, 20 ms, 40 ms, 80
ms, 160 ms. The SS burst period (SSB periodicity) is defined by each base
station and network configurable. 20 ms is the default for the initial cell selection.
11 Tap to switch PCI (Physical Cell ID) to Manual or Auto.
12 Tap PCI and input a value from 0 to 1007 using the on-screen keyboard. The PCI
switches to Manual.
Table 50 Setup per operating frequency
Operating
frequency
< 3 GHz
(FR1)
< 3 GHz
(FR1)
< 3 GHz
(FR1)
3 to 6 GHz
(FR1)
3 to 6 GHz
(FR1)
3 to 6 GHz
(FR1)
Page 232
Tap Auto Preamp/Atten and switch SSB Auto Search to Start to set
preamp and attenuation automatically.
Tap Manual and switch SSB Auto Search to Start for manually setting
based on your need.
Start: to search SCS, type, and the number of SSB automatically. Once Start
is selected, the progress bar appears. If it fails to perform the auto search, a
fail message appears and the SSB switches to Manual.
Stop: to set the SSB periodicity based on the base station.
L
4
4
4
8
8
8
SPA06MA-O User's Guide
Case
A
{2,8} +14*n
B
{4,8,16,20}
+28*n
C
{2,8} +14*n
A
{2,8} +14*n
B
{4,8,16,20}
+28*n
C
{2,8} +14*n
22145360, R005
Table 52
Slots in a
SCS
burst period
15 kHz
5 (1 ms)
30 kHz
10 (0.5 ms)
30 kHz
10 (0.5 ms)
15 kHz
5 (1 ms)
30 kHz
10 (0.5 ms)
30 kHz
10 (0.5 ms)
below
April 2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa06ma-oSpa06ma

Table of Contents