Table of Contents
Advertisement
Figure 105 5G NR beam analyzer measurement
Carrier scanner
5G Carrier Scanner provides an easy and fast response power measurements of up to
eight single component carriers of 100 MHz. The power measurement for each carrier
incldes:
•
S-SS RSRP (Secondary Synchronized Signal – Reference Signal Received
Power) — linear average over the power contributions (in Watts) of the resource
elements which carry secondary synchronization signals
•
Channel Power — integrated power of the entire channel bandwidth (100 MHz)
during an entire transmission frame (10 ms)
Setting measure setup
Before starting the Beam Analyzer, you need to set Spectrum measurements displayed
on the quick access and display tab. See
page 9
To set measure setup
1
Tap the Setup (
April 2021
NOTE
The undetected values in the Detected ID List table will be indicated as "--".
You cannot save the measurement as a Result, instead Logging as CSV
option is added.
for more details.
) icon in the side bar.
SPA06MA-O User's Guide
"Configuring spectrum measurements" on
22145360, R005
Chapter 7 Using 5G NR Signal Analyzer
Conducting OTA measurement
Page 215
Advertisement
Table of Contents
