Table of Contents
Advertisement
Carrier setting
1
Tap Index to select up to 6 numbers of carriers.
2
Select Center Frequency to set the center frequency using the on-screen
keyboard.
3
Select Channel Standard to set the channel standard for the selected index
using the on-screen keyboard.
4
Select Channel Number to set the channel number for the selected index using
the on-screen keyboard.
5
Select Bandwidth from the following options: 1.4 MHz, 3 MHz, 5 MHz, 10 MHz,
15 MHz, or 20 MHz.
6
Tap the External Offset box and input the value using the on-screen keyboard
and tap to switch the external offset to On (green) or Off (gray) as desired.
7
Tap the Attenuation box and input the value using the on-screen keyboard if you
want to set it manually (Manual). Or tap it to set Auto.
8
Tap to switch the Preamp box 1, 2, and Auto to On (green) or Off (gray).
9
Tap the Add button to add Index or Delete button to delete the selected Index.
To set limit
1
Tap Menu > Limit.
2
Tap to switch Limit Line to On or Off.
3
Tap Limit Line and input the value using the on-screen keyboard to enable or
disable Pass/Fail indication.
Figure 84
Figure 84 LTE/LTE-A TDD OTA channel scanner measurement
April 2021
shows an example of OTA LTE/LTE-A TDD channel scanner measurement.
SPA06MA-O User's Guide
22145360, R005
Chapter 6 Using LTE/LTE-A TDD Analyzer
Conducting OTA measurement
Page 169
Advertisement
Table of Contents
