Table of Contents
Advertisement
3
Input the Azimuth field if you want to check the direction of antenna.
4
Make sure to save the file as (Comma delimited) (*.csv).
5
Copy the file to the USB memory stick and insert it to the USB A or USB B port of
the instrument.
6
Tap the Load (
7
Import the saved file.
Once the file is loaded, the following cellsite information appears with an icon.
Figure 158
Figure 158 Importing Cellsite DB
Figure 159 Route map measurement with site information screen
April 2021
) icon on the side bar.
shows an example of an importing cellsite DB.
NOTE
If the Plot Point is set to Position, you can tap the estimated area by point. If
you tap incorrectly, you can tap Undo icon on the map, and then it will delete
the point you have tapped incorrectly.
SPA06MA-O User's Guide
22145360, R005
Chapter 9 Using 5G DSS Signal Analyzer
Conducting OTA measurement
Page 347
Advertisement
Table of Contents
