Table of Contents
Advertisement
Figure 173 Connecting an isotropic antenna
To connect a log-periodic antenna
1
Mount a broadband antenna to your AntennaAdvisor Handle.
2
Connect the RF Type-N Jack of the handle to the RF In port of the instrument.
3
Connect the GNSS SMA jack of the handle to the GNSS port of the instrument.
The GNSS status indicator appears on the instrument screen.
4
Connect the USB plug of the handle to the USB Host port of the instrument. The
device icon appears in the system status bar on the screen.
Figure 174
April 2021
NOTE
The AntennaAdvisor Handle is an optional item. It is recommended that you
use a log periodic antenna with AntennaAdivsor handle to search more exact
directional information. You can use a log periodic antenna or Omni antenna
alone as well.
shows an example of a log-periodic antenna connection.
SPA06MA-O User's Guide
22145360, R005
Chapter 11 Using EMF Analyzer
Connecting antenna
Page 377
Advertisement
Table of Contents
