Table of Contents
Advertisement
Figure 132 Legend color table
Logging data
To use any features related to maps, you need to download and install the maps on the
instrument. The VIAVI JDMapCreator will help you download maps. Make sure the
JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the Send
to EQP menu in JDMapCreator. For more information on how to use the JDMapCreator,
see the JDMapCreator 2.0 User Guide.
To log data
1
Follow step 1 to 5 in Setting measure setup.
2
Tap the Testing (
map. When you select a point on the map, a marker appears and the Information
window appears on the right panel.
3
Tap the Stop (
4
Tap the Pause button (
plotted.
5
If you start test and select Menu > Map > Plot Point > Position, you can undo by
tapping the Testing button.
6
If you select the Stop button, the Plot Stop pop-up window appears, then tap Yes.
7
Tap Yes when the Save pop-up window appears and the logging file to your USB.
April 2021
) button on the right panel of the map to start plotting on the
) button to stop plotting.
) to pause plotting, then the GPS point cannot be
SPA06MA-O User's Guide
22145360, R005
Chapter 8 Using NSA Signal Analyzer
Conducting OTA measurements
Page 285
Advertisement
Table of Contents
