Table of Contents
Advertisement
For information about connecting the antenna, see
Loading a map
To use any features related to maps, you need to download and install the maps on the
instrument. The VIAVI JDMapCreator will help you to download maps. Ensure the
JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the Send
to EQP menu in JDMapCreator. For information about how to use the JDMapCreator,
see the JDMapCreator 2.0 User Guide.
To load a map
1
Plug in your USB flash drive that has a map file in .mcf file type created in JDMap-
Creator.
2
Tap the Load icon on the side bar,
3
Navigate to the map you want to open. The File Information pane displays the
file properties, including name, size, type, and date modified.
4
Tap the Load button on the screen.
Once you have loaded the map, you can also control the map using the following icons
on the map.
Table 15 Map control icons
Icon
April 2021
Description
Tap to go to your current location on the map. Once tapped, the purple icon
appears on the map, indicating your current location.
Tap to switch to the full screen map view.
Tap to zoom in the map.
Tap to zoom out the map.
Tap and select the area where you want to expand.
SPA06MA-O User's Guide
22145360, R005
Chapter 3 Using Interference Analyzer
Conducting interference measurements
"Antenna connection" on page
45.
Page 51
Advertisement
Table of Contents
