Multi-Aclr - Viavi SPA06MA-O R005 User Manual

Table 38 Sync SCS offset range per SSB SCS and sync SCS resolution
SSB SCS (kHz)
15
30
120
240
To set the limit
1 Tap Menu > Limit.
2 Tap to switch the Test Limits to On or Off to enable or disable Pass/Fail indica-
tion. The result table color for Pass is green, and the result table color for Fail is
red.
3 Optional. Tap the Save hot key on the side bar and select the save option form the
choices available for your measurement mode.
Figure 102
Figure 102 5G NR ACLR measurement

Multi-ACLR

The Multi-ACLR measurement is used to perform multi-channel ACLR measurements
with as many channels as possible. It helps you to measure ACLR in multi-channel
transmitting Base Station environment.
April 2021
Sync Raster
Resolution (kHz)
15
30
120
240
shows an example of 5G NR ACLR measurement.
SPA06MA-O User's Guide
22145360, R005
Chapter 7 Using 5G NR Signal Analyzer
Conducting RF measurements
Sync Raster
Offset Range
0 to 11
0 to 5
0 to 5
0 to 2
SSB Frequency
= Center
Frequency
0
0
0
0
Page 207