Viavi SPA06MA-O R005 User Manual page 194

Table of Contents

Advertisement

Chapter 6 Using LTE/LTE-A TDD Analyzer
Conducting OTA measurement
to EQP menu in JDMapCreator. For more information on how to use the JDMapCreator,
see the JDMapCreator 2.0 User Guide.
To load a map
1
Plug in your USB flash drive that has a map with a file type of .mcf created in
JDMapCreator.
2
Tap the Load (
3
Navigate to the map file that you want to open.
The File Information pane displays the file properties, including its name, size,
type, and date modified.
4
Tap the Load button on the screen.
5
Once you have loaded the map, you can also control the map using the following
icons on the map.
Table 23 Map icons
Icon
The left-most cell-site icon is activated when you import the cell-site information file.
To set measurement setup
Before starting the Route Map measurement, you need to set Spectrum measurements
displayed on the quick access and display tab. See
ments" on page 9
1
If required, connect a GNSS receiver to your instrument for outdoor mapping.
Indoor mapping does not necessarily need a GNSS antenna.
2
Tap the Setup (
Page 178
) icon on the side bar.
Description
Tap to go to your current location on the map. Once tapped,
a purple icon appears on the map, indicating your current
location.
Tap to switch to the full screen map view.
Tap to zoom in on the map.
Tap to zoom out on the map.
Tap and select the area that you want to expand.
for more information.
) icon on the side bar.
SPA06MA-O User's Guide
22145360, R005
"Configuring spectrum measure-
April 2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa06ma-oSpa06ma

Table of Contents