Table of Contents
Advertisement
Chapter 9 Using 5G DSS Signal Analyzer
Conducting modulation measurements
To set the limit for
P-SS Power
S-SS Power
PBCH Power
IQ Origin Offset
4
Optional. Tap the Save icon on the side bar and select the save option form the
choices available for your measurement mode.
Figure 147
Figure 147 5G DSS DSS control channel measurement
Page 314
Set
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High/Low Limit
Note that based on the Reference Mode you have chosen
from Menu > Reference Mode between Absolute and
Relative, you can set the first high/low limit when you
chose absolute, and second high/low limit when you chose
relative.
Test limits On/Off, High Limit
shows an example of DSS control channel measurement.
SPA06MA-O User's Guide
22145360, R005
April 2021
Advertisement
Table of Contents
