Table of Contents
Advertisement
Chapter 9 Using 5G DSS Signal Analyzer
Conducting OTA measurement
to EQP menu in JDMapCreator. For information about how to use the JDMapCreator,
see the JDMapCreator 2.0 User Guide.
To load a map
1
Plug in your USB flash drive that has a map file in .mcf file type created in JDMap-
Creator.
2
Tap the Load (
3
Navigate to the map file that you want to open.
The File Information pane displays the file properties, including its name, size,
type, and date modified.
4
Tap the Load button on the screen.
Once you have loaded the map, you can also control the map using the following icons
on the map.
Table 78 Map control icons
Icon
The left-most cell-site icon is activated when you import the cell-site information file.
To set measurement setup
Before starting the Route Map measurement, you need to set Spectrum measurements
displayed on the quick access and display tab. See
ments" on page 9
Page 342
) icon on the side bar.
Description
Tap to go to your current location on the map. Once tapped, the purple icon
appears on the map, indicating your current location.
Tap to switch to the full screen map view.
Tap to zoom in the map.
Tap to zoom out the map.
Tap and select the area where you want to expand.
for more information.
SPA06MA-O User's Guide
22145360, R005
"Configuring spectrum measure-
April 2021
Advertisement
Table of Contents
