Table of Contents
Advertisement
8
Tap SSB Auto Search Mode and do the following steps:
a
b
9
Tap SSB Periodicity and select the options from 5 ms, 10 ms, 20 ms, 40 ms, 80
ms, 160 ms. The SS burst period (SSB periodicity) is defined by each base
station and network configurable. 20 ms is the default for the initial cell selection.
10 Tap to switch PCI (Physical Cell ID) to Manual or Auto.
11 Tap PCI and input a value from 0 to 1007 using the on-screen keyboard. The PCI
switches to Manual.
12 Tap BS Type and select the option from 1-C/1-H, 1-O, or 2-O.
Set 1-C (Conducted)/1-H (Hybrid) for multi-band operation with mapping of trans-
ceivers to one or more antenna connectors (1-C) or TAB (transceiver array
boundary) connectors for 1-H. Set 1-O when BS operates at FR1 and 2-0 when
BS operates at FR2.
13 Tap Category and select the option from Wide Area BS A, Wide Area BS B,
Medium Range BS, or Local Area BS.
The category is defined with base station type. Set Wide Area BS A/B for macro
cell, Medium Range BS for micro cell, and Local Area Base Station for pico cell.
14 Tap Menu > Trigger and tap to switch Burst Spectrum to On or Off, which takes
time for FPGA change.
–
–
15 Tap Menu > Trigger and tap to switch Triggered Spectrum to On or Off, which
takes time for FPGA change.
Table 36 Setup per operating frequency
Operating
frequency
< 3 GHz
(FR1)
< 3 GHz
(FR1)
April 2021
Tap Auto Preamp/Atten and switch SSB Auto Search to Start to set
preamp and attenuation automatically.
Tap Manual and switch SSB Auto Search to Start for manually setting
based on your need.
NOTE
If you tap SSB Auto Search to Start, the searching progress screen appears to
let you know the status of searching.
You can tap SSB Auto Search to Stop to stop searching.
On: Functions as Threshold RMS Spectrum. Automatically sets UI Update
Rate 100 ms, Average 100, RBW 100kHz, VBW 100kHz
Off: Functions as PSS Correlation Spectrum. Automatically sets UI Update
Rate 600 ms, Average 1, RBW 100kHz,VBW 100kHz
L
4
4
SPA06MA-O User's Guide
Case
A
{2,8} +14*n
B
{4,8,16,20}
+28*n
22145360, R005
Chapter 7 Using 5G NR Signal Analyzer
Conducting RF measurements
Slots in a
SCS
burst period
15 kHz
5 (1 ms)
30 kHz
10 (0.5 ms)
Page 205
Advertisement
Table of Contents
