Table of Contents
Advertisement
6
Tap PCI and input a value from 0 to 503 using the on-screen keyboard.
The PCI switches to Manual.
7
Tap Antenna Port to assign an antenna port number automatically or manually,
and select from Auto, Antenna 0, Antenna 1, Antenna 2, or Antenna 3.
If the MIMO is set to 2x2, the antenna ports 2 and 3 are disabled.
8
Select MIMO between 2x2 and 4x4 to set the number of antenna ports.
9
Select Cyclic Prefix between Normal and Extended.
Cyclic prefix works as a buffer region or guard interval to protect the OFDM
signals from inter symbol interference.
–
–
To set the limit
1
Tap Menu > Limit.
2
Tap the test items and set the limits depending on your selected measurement
mode:
To set the limit for
Slot Average
Power
Off Power
Transition Period
3
Optional. Tap the Save icon on the side bar and select the save option from the
choices available for your measurement mode.
Figure 144
April 2021
Normal: Intended to be sufficient for the majority of scenarios
Extended: Intended for scenarios with particularly high delay spread
Set
Test limits On/Off, High Limit/Low Limit using the on-screen
keyboard
Test limits On/Off, High Limit/Low Limit using the on-screen
keyboard
Test limits On/Off, High Limit/Low Limit using the on-screen
keyboard
shows an example of Power vs Time (Slot) measurement.
SPA06MA-O User's Guide
22145360, R005
Chapter 9 Using 5G DSS Signal Analyzer
Conducting Power vs Time measurements
Page 303
Advertisement
Table of Contents
