Table of Contents
Advertisement
Chapter 4 Using Real-Time Spectrum Analyzer
Conducting interference analysis
Figure 34 Antenna connection example
To connect an antenna
1
Mount a broadband antenna to your AntennaAdvisor Handle.
2
Connect the RF Type-N Jack of the handle to the RF In port of the instrument.
3
Connect the GNSS SMA jack of the handle to the GNSS port of the instrument.
The GNSS status indicator appears on the instrument screen.
4
Connect the USB plug of the handle to the USB Host port of the instrument. The
device icon appears in the system status bar on the screen.
Loading a map
To use any features related to maps, you need to download and install the maps on the
instrument. The VIAVI JDMapCreator will help you to download maps. Ensure the
JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the Send
Page 70
NOTE
The AntennaAdvisor Handle is an optional item. It is recommended that you
use a log periodic antenna with AntennaAdivsor handle to search more exact
directional information. You can use a log periodic antenna or Omni antenna
alone as well.
SPA06MA-O User's Guide
22145360, R005
April 2021
Advertisement
Table of Contents
