Xerox WorkCentre 7132 Service Documentation page 332

021-360 EP Accessory Failure RAP
An error occurred in the connection to the EP accessory. The accessory that was supposed to
be installed is not present.
Procedure
Check the connections and P/Js on the ESS PWB (PL 11.2) and check that any accessory
PWB's are installed securely.
If the problem persists, reload Software (ADJ 9.3.1).
Revision
WorkCentre 7132
021-361 EP Accessory Kind Configuration Error RAP
The System Data 850-007 is set to 0 (Off) during connection to conventional countdown EP
related accessories.
Procedure
Check that the System Data 850-007 is set correctly.
If it is set correctly, perform the following:
Reload Software (ADJ 9.3.1).
If the problem persists, pull out and insert the EPSV board and check the P/Js.
If the problem persists, replace the ESS PWB (PL 11.2).
January 2007
2-299
Status-indicator-raps
021-360, 021-361