Xerox WorkCentre 7132 Service Documentation page 290

If the 16-782 fault does not occur when disconnecting the customer's network cable and
attempting a scan job but the 16-782 fault does occur when the machine is connected to
the PWS, then there is likely a set up problem when using the GP 14 procedure. Escalate
to your next level of support.
There is a machine problem. Perform the following steps, in order:
• Reload the system software
• Refer to GP 13 to delete all Templates and Repository settings. Then, refer the customer
to the section titled "CentreWare Internet Services" in the WC7132 User Guide for details
on how to recreate the Templates and re-enter the Repository settings.
• Re initialize the NVM by selecting the SYS-SYSTEM and SYS-USER NVM platforms.
Revision
WorkCentre 7132
016-783 Invalid Server Path RAP
The specified path cannot be found during Scan to Server file transfer.
Procedure
Check the server path name specified in the job template.
If this code appears while using CentreWare Scan Service, refer to the 'CentreWare Scan Ser-
vice Installation Guide'.
January 2007
2-267
Status-indicator-raps
016-782, 016-783