Xerox WorkCentre 7132 Service Documentation page 260

016-722 Staple Position RAP
The job was cancelled when the Staple Position could not be determined.
Initial Actions
Ensure the staple position selection matches the available staple position in the finisher.
Procedure
Refer customer to following User Guide headings:
• [Image Rotation] - [Rotation Direction Screen]
Revision
WorkCentre 7132
016-724 Staple Position RAP
The staple selection and hole punch selection is not compatible.
Initial Actions
Ensure the staple position selection and hole punch position selection is compatible (no holes
will be punched on staples or staples located in holes)
Procedure
Refer customer to following User Guide headings:
• [Image Rotation] - [Rotation Direction Screen]
January 2007
2-237
Status-indicator-raps
016-724, 016-725