To Build A User Symbol Table - Agilent Technologies HP 1660E Series User Manual

Using the Pattern Generator
Building Test Vectors and Macros

To build a User Symbol Table

You may want to build a symbol table to make inserting values into your
program easier. You can name a symbol for one value in a label and
insert that symbol into your vector sequence where you need it.
1 From the Format menu, select the Symbols field at the right of
the menu.
2 Set the desired Label, Base, and Symbol Width.
Symbols are specific for a given label. Symbol width determines the
width of the symbolic name displayed in the Sequence menu.
3 Select the Symbol field, then enter a name for the symbol.
4 Select the desired symbol Type, then enter the Pattern/Start and
Stop values.
The type is either a pattern or a range. A range provides a symbolic
method for defining values within a specified range.
5 If you want to add more symbols, select the Symbol field Then
select Add a Symbol, and repeat steps 2 through 4.
6 Select Done.
168