Performing System Operations
Configuring the Characteristics of an External LO
Minimum and Maximum Frequencies
The minimum and maximum frequencies, in most cases, represent the
frequency capability of the LO. However, they do not affect the LO and
are only used by the NFA to determine if the requested frequency
parameter is acceptable. If an attempt to enter an out-of-range frequency
is made, the NFA displays an invalid frequency entry error message.
Pressing the
menu key allows you to set the minimum frequency
Min Freq
the NFA expects the External LO to have. The default value is 10 MHz.
Pressing the
menu key allows you to set the maximum
Max Freq
frequency the NFA expects the External LO to have. The default value is
26.5 GHz.
Chapter 4
65