Calculate<1|2>:Threshold Minimum To Maximum (Depending On Current Unit); Calculate<1|2>:Threshold:state On | Off; Calculate<1|2>:Fline<1|2> 0; Calculate<1|2>:Fline<1|2>:State On | Off - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:THReshold MINimum to MAXimum (depending on current unit)
The command specifies the threshold value for the maximum/minimum search of markers with marker
search functions MAX PEAK, NEXT PEAK, etc.
The associated display line is automatically turned on.
The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
State Saved
CALCulate<1|2>:THReshold:STATe ON | OFF
The command turns the threshold line on or off.
The unit depends on the setting performed by CALC:UNIT.
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved
CALCulate<1|2>:FLINe<1|2> 0...fmax
Specifies the position of the frequency lines.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
State Saved
CALCulate<1|2>:FLINe<1|2>:STATe ON | OFF
Switches the frequency line on or off.
102
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:THReshold <ampl>
:CALCulate[1]:THReshold?
CALC:THR –82DBM
FSE, FSP, FSU
Saved in instrument state.
:CALCulate[1]:THReshold:STATe ON|OFF|1|0
:CALCulate[1]:THReshold:STATe?
CALC:THR:STAT ON
FSE, FSP, FSU
OFF
Saved in instrument state.
:CALCulate[1]:FLINe[1]|2 <freq>
:CALCulate[1]:FLINe[1]|2?
CALC:FLIN 120MHz
FSE, FSP, FSU
Saved in instrument state.