Searching For The Maximum And Minimum Measured Values - Agilent Technologies ENA Series User Manual

Searching for the Maximum and Minimum Measured Values

You can search for the maximum or minimum measured value on the trace and move a
marker to that point. (See Figure 6-5.)
Figure 6-5 Searching for the Maximum and Minimum Measured Values
Search for the maximum
(
Max
Search for the minimum
(
Min
Searching for Maximum and Minimum Values
Step 1. Following Step 1 to Step 4 in "Reading Values on the Trace" on page 128, activate the
marker you are using to search for the maximum and minimum values.
Step 2. Press
Step 3. Press the corresponding softkey to move the marker to the maximum or minimum
measured value.
Softkey
Max
Min
NOTE
When the data format is in Smith chart or polar format, execute the search for the main
response value of the two marker response values.
Chapter 6
Move the active marker to the point on the trace where the
measured value is greatest.
)
Move the active marker to the point on the trace where the
measured value is lowest.
)
.
Analyzing Data on the Trace Using the Marker
Function
Perform a search for the maximum value.
Perform a search for the minimum value.
Data Analysis
135