Coupled Markers; Marker Trace - Agilent Technologies FieldFox N9912A User Manual

Coupled Markers

Coupled Markers, available in NA mode only, allows you to simultaneously create
and move markers that have the same number for all traces. For example, when
marker 2 is created on a trace, a marker 2 is created for ALL traces. When any
marker 2 is moved, they all move together to the same X-axis position.
 Coupled markers are allowed only in NA mode and are relevant only in multi-
 You can have markers that are coupled, and others that are uncoupled.
 Peak functions move the marker to the peak on the active trace, while all other
Coupled Markers ON allows Marker 1 to be moved on ALL traces at the same time.
How to create Uncoupled Markers
NOTE Markers are coupled by default.
To create markers that are NOT coupled (move independently on each trace):
 Press Marker
 Then
 Then

Marker Trace

Both CAT and NA Modes can display a data trace and a memory trace. By
default, markers are assigned to the data trace. However, you can move a marker
between the data and memory trace. The marker moves to the same X-axis
location on the specified trace.
In SA Mode, markers can be moved between four possible traces using the
Marker Trace menu. Learn more about SA Trace States on page 78.
124
trace configurations.
markers move to the same X-axis position.
More
Coupled Markers OFF
N9912A FieldFox User's Guide