Calculate:marker; Markers All Off On All Traces - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
CALCulate:MARKer Subsection
CALCulate:MARKer Subsection

Markers All Off on All Traces

:CALCulate:MARKer:AOFF
Turns off all markers on all the traces.
Front Panel
Access:
Continuous Peaking Marker Function
:CALCulate:MARKer[1]|2|3|4:CPEak[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4:CPEak[:STATe]?
Turns on or off continuous peaking. It continuously puts the selected marker on the
highest displayed signal peak. Refer to
more information.
NOTE This function is intended to maintain the marker on signals with a frequency that is
changing, and an amplitude that is not changing.
Factory Preset
and *RST:
Remarks:
Front Panel
Access:
Frequency Counter Marker Resolution
:CALCulate:MARKer:FCOunt:RESolution <real>
:CALCulate:MARKer:FCOunt:RESolution?
Sets the resolution of the marker frequency counter. Setting the resolution to
AUTO will couple the marker counter resolution to the frequency span.
Factory Preset
and *RST:
Range:
Default Unit:
250
Marker, Marker All Off
"Continuous Pk On Off" on page 118
Off
This command may not be used to activate a given marker.
Peak Search (or Search), Continuous Pk On Off
1 kHz
1 Hz to 100 kHz
Hz
for
Chapter 5