Questionable Register Sets - Keysight Technologies EPM-P Series Programming Manual

Questionable Register Sets

The questionable register sets contain information which gives an indication of the
quality of the data produced by the power meter. The contents of the individual
registers in these register sets may be accessed by appending the commands
listed in
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
Keysight EPM-P Series Programming Guide
Status Register Set Commands.
STATus Subsystem 10
441