Display:enable <Boolean - Keysight Technologies EPM-P Series Programming Manual

DISPlay:ENABle <boolean>
This command is used to enable and disable the display. At power-up the display
is always enabled.
Syntax
Example
DISP:ENAB 0
Reset condition
On reset, the display is enabled.
Query
DISPlay:ENABle?
The query returns a 1 or 0 into the output buffer.
– 1 is returned when the display is enabled.
– 0 is returned when the display is disabled.
Query example
DISP:ENAB?
Keysight EPM-P Series Programming Guide
DISP
:ENAB
Space
0|OFF
1|ON
?
This command disables the display.
This command queries whether the
display is on or off.
DISPlay Subsystem 5
265