Service:sensor[1]|2:Tnumber - Keysight Technologies EPM-P Series Programming Manual

15 SERVice Subsystem

SERVice:SENSor[1]|2:TNUMber?

This query returns the tracking number for E-Series sensors. Tracking number
information is stored in the sensor's EEPROM.
Syntax
Example
Error messages
– If no sensor is connected, error -241, "Hardware missing" occurs.
– If a non E-Series sensor is connected, error -241 "Hardware missing" occurs.
600
SERV :SENS
SERV:SENS2:TNUM?
1 :TNUM
2
This query returns the serial number of the
E-Series sensor connected to channel B.
Keysight EPM-P Series Programming Guide
?