Keysight Technologies EPM-P Series Programming Manual page 416

9 SENSe Subsystem
Query
SENSe[1]]|SENSe2:TRACe:OFFSet:TIME?
The query returns the current delay between the delayed trigger point and the
start of the trace.
Query example
Error messages
– If the command is used when a non E9320 sensor is connected, the
– If the command is used when an E9320 sensor is connected and set to
416
SENS:TRAC:OFFS:TIME?
error -241, "Hardware missing" occurs.
AVERage mode rather than NORMal mode, the error -221, "Settings Conflict"
occurs.
This command queries the current delay
between the delayed trigger point and the
start of the trace for channel A.
Keysight EPM-P Series Programming Guide