Output:recorder[1]|2:Limit:lower <Numeric_Value - Keysight Technologies EPM-P Series Programming Manual

OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value>
This command sets the minimum scaling value for the specified recorder output.
The units used are dependent on the units currently set for the CALC block
specified in OUTPut:RECorder[1]|2:FEED <data_handle>.
Syntax
OUTP
Parameters
Item
numeric_value
Example
OUTP:REC:LIM:LOW -90
Reset condition
On reset, the minimum scaling value is set to -150 dBm.
Query
OUTPut:RECorder[1]|2:LIMit:LOWer?
The query command returns the minimum scaling value.
Keysight EPM-P Series Programming Guide
:REC
1
2
Description/Defaul t
A numeric value for the minimum scaling value. The units
used—dBm, W or %—are dependent on the units currently
set for the CALC block specified in
OUTPut:RECorder[1]|2:FEED
<data_handle>.
:LIM :LOW
This command sets the minimum
scaling value to -90.
OUTput Subsystem
Space numeric_value
?
Range of values
-150 to +20 dBm
1 aW to 100 mW
0% to 100%
8
335