Memory:clear Commands - Keysight Technologies EPM-P Series Programming Manual

Power meters

Hide thumbs Also See for EPM-P Series:

Table of Contents

MEMory Subsystem

MEMory:CLEar Commands

These commands are used to remove the contents stored in the sensor calibration

tables (8480 Series power sensors and N8480 Series sensors with Option CFT

only), frequency dependent offset tables and save/recall registers. This subsystem

removes the data contents but does not affect the name of the associated table or

save/recall register.

The following commands are detailed in this section:

MEMory:CLEar:[NAME] <character_data>

MEMory:CLEar:TABLe

The contents cleared using these commands are non-recoverable.

Keysight EPM-P Series Programming Guide

Table of Contents