Keysight Technologies EPM-P Series Programming Manual page 409

Query example
Error messages
– If the command is used when a non E9320 sensor is connected, the
– If the command is used when an E9320 sensor is connected and set to
Keysight EPM-P Series Programming Guide
SENS2:SWE2:TIME?
error -241, "Hardware missing" occurs.
AVERage mode rather than NORMal mode, the error -221, "Settings Conflict"
occurs.
SENSe Subsystem
This command queries the length of the
time-gated period for channel B and gate
2.
9
409