[:Event]; Enable <Nrf>|<Non-Decimal Numeric - Keysight Technologies EPM-P Series Programming Manual

[:EVENt]?

This query returns a 16 bit decimal-weighted number representing the bits set in
the Event Register of the SCPI Register Set you require to control. The format of
the return is <NR1> in the range of 0 to 32767 (2
the register to 0.
Syntax
:ENABle <NRf>|<non-decimal numeric>
This command sets the Enable Register of the particular SCPI Register Set you
require to control. The parameter value, when rounded to an integer and
expressed in base 2 has it's first 15 bits written into the Enable Register of the
SCPI Register Set concerned. The last bit (bit 15) is always set to 0.
Syntax
Parameters
Type
NRf
non-decimal numeric
Keysight EPM-P Series Programming Guide
?
:EVEN
space
:ENAB
15
-1). This query clears all bits in
NRf
non-decimal numeric
?
Description
The value used to set the Enable
Register.
STATus Subsystem
Range of values
16
0 to 2 -1
10
427