Keysight Technologies EPM-P Series Programming Manual page 228

3 CALCulate Subsystem
Parameter
Item
numeric_value
Example
CALC2:LIM:UPP:DATA 5
Reset condition
On reset, both channels are set to +90.00 dBm or +90 dB.
Query
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA]? [MIN|MAX]
The query returns the current setting of the upper limit or the values associated
with MIN and MAX for the specified window/measurement.
Query example
CALC2:LIM:UPP:DATA?
228
Description
A numeric value for the upper test limit:
– DEF: the default is -90.00 dBm or -90 db.
– MIN: -150 dBm or -180 dB.
– MAX: +230 dBm or +200 dB.
This command enters an upper limit
for the lower window/upper
measurement depending on the
window's units as follows:
dBm = 5 dBm
W = 5 W
dB = 5 dB
% = 5%
This command queries the setting of
the upper limit for the lower window/
upper measurement.
Keysight EPM-P Series Programming Guide
Range of values
-150 to +230 dBm or
-180 to +200 dB
DEF
MIN
MAX