Format[:Readings]:Border <Character_Data - Keysight Technologies EPM-P Series Programming Manual

FORMat[:READings]:BORDer <character_data>
This command controls whether the binary data is transferred in normal or
swapped Byte ORDer. It is only used when FORMat[:READings][:DATA] is set to
REAL.
Syntax
Parameters
Item
character_data
Example
Reset condition
On reset, this value is set to NORMal.
Query
FORMat[:READings]:BORDer?
The query returns the current setting of the byte order. The format of the response
is NORMal or SWAPped.
Keysight EPM-P Series Programming Guide
:READ
FORM
Description/Defaul t
Byte order of binary data transfer:
– NORMal
– SWAPped
FORM:BORD SWAP
Space
:BORD
This command sets the byte order to
swapped.
FORMat Subsystem
character_data
?
Range of values
NORMal
SWAPped
6
295