System:communicate:serial:transmit:sbits <Numeric_Value - Keysight Technologies EPM-P Series Programming Manual

SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
This command sets the number of stop bits expected by the receiver on received
data and the number of stop bits included by the transmitter in transmitted data.
Syntax
SYST
Parameters
Item
numeric_value
Example
Reset condition
On reset, the number of stop bits is unaffected.
Query
SYSTem:COMMunicate:SERial:TRANsmit:SBITs?
The query returns the current setting of the transmit/receive stop bits.
Query example
Keysight EPM-P Series Programming Guide
:COMM :SER
Description/Defaul t
A numeric value for the number of stop bits.
SYST:COMM:SER:TRAN:SBIT 2
SYST:COMM:SER:TRAN:SBIT?
:TRAN :SBIT
This command sets the number of stop bits
for the transmitter and receiver to 2.
This command queries the setting of the
receive/transmit stop bits.
SYSTem Subsystem
Space numeric_value
?
Range of values
1 or 2
11
473