Keysight Technologies EPM-P Series Programming Manual page 233

Parameter
Item
string
[a] Quotes are mandatory. Either single or double quotes may be used.
[b] E4417A only.
Example
Reset condition
On reset, the Keysight E4416A upper and lower window measurements are set to
channel A ("(SENS1)"). On the E4417A the upper window measurements are set
to channel A ("(SENS1)") and the lower window measurements to channel B
("(SENS2)")
Keysight EPM-P Series Programming Guide
Description/Defaul t
A single string value detailing the measurement type:
– For the Keysight E4416A the default is SENS1.
– For the Keysight E4417A the default is SENS1 if the
upper window is selected, or SENS2 if the lower
window is selected.
CALC2:MATH "(SENS2/SENS1)"
CALCulate Subsystem
Range of values
"(SENS1)"
"(SENS2)"
"(SENS1-SENS1)"
"(SENS2-SENS2)"
b]
"(SENS1/SENS1)"
"(SENS2/
SENS2)"
"(SENS1-SENS2)"
b]
"(SENS2-SENS1)"
b]
"(SENS1/
SENS2)"
"(SENS2/
SENS1)"
This command sets the lower
window/upper measurement to make
a channel B/A ratio measurement.
3
[a]
[a],[b]
[a]
[a],[
[a]
[a],[b]
[a],[
[a],[
[a],[b]
[a],[b]
233