Keysight Technologies EPM-P Series Programming Manual page 561

Reset condition
On reset, TRIGger:DELay:AUTO is set to ON.
Query
TRIGger:DELay:AUTO?
The query enters a 1 or 0 into the output buffer indicating the status of
TRIGger:DELay:AUTO.
– 1 is returned when it is ON.
– 0 is returned when it is OFF.
Query example
Keysight EPM-P Series Programming Guide
TRIG:SEQ2:DEL:AUTO?
TRIGger Subsystem
This command queries the settling-time
delay of channel B.
13
561